I wish you a good day, I have been looking for some useful information about VPWS but with no clue even when I try to type in Google, "VPWS", it suggests "VPLS" instead. I know simple …

Xconnect shows up. MPLS ping works, but CE devices cant talk.

Also, If I add all the additional config, does is affect the current Xconnect circuit? Does is it create interruption on it service/down time on the Xconnect VC / afect the customer?

Now for some reason, when I turned the xconnect up and spanning-tree does it process, it brings the RSTP instance (for that VLAN) on the client switch (attached to the 7606 PE) up as BKN …

Im studying for the CCNA SP exam and am going through the IO-XR Fundamentals book and reading the chapter on MPLS VPNs, in particular the section on L2VPN using VPWS.

Xconnect from R2 fastethernet to R1 and same xconnect on the other side ( fastethernet from R4 to R3) It works. So I decided to push it a bit further. Subinterface for Vlan 10 on the left side …

any idea why ISIS adj is not forming over L2VPN frame-relay P2P, but CLNS adj is forming?? Its seems like each CE isn't receiving LAN IIH packets from other end.

Aug 19, 2024 · Does anyone also have this issue with Radeon eGPUs? AMD XConnect eGPU notification seems to have loaded the wrong unicode for the ™ symbol. Adrenaline version is …

In port mode, you configure the xconnect under the physical interface and all incoming ethernet frames (including the .1q tag if exists) is transmitted untouched to over side of the pseudowire. …

xconnect <remote PE> <vc-id, must be the same in both ends> encapsulation mpls R1# interface fast 0/0 no ip address xconnect 172.2.2.1 100 encapsulation mpls R2# interface fast 0/0 no ip …